Your cart
Your cart is empty
Continue shopping
RM MOTORS JEEP CHEROKEE XJ 2.5/4.0 Ljuddämpare
Increments of 1
Minimum of 1
Maximum of
1Lågt antal
1I lager, redo att skickas!
Sale price
1 398,38 kr
Regular price
1 398,38 kr
Regular price
1 398,38 kr
Unit price
Tax included.
Couldn't load pickup availability
Get notified by email when this product becomes available
Have a question?
Beskrivning
RM MOTORS JEEP CHEROKEE XJ 2.5/4.0 Ljuddämpare
Beskrivning:
Ljuddämpare RM MOTORS JEEP Cherokee XJ, 2.5 and 4.0 benz.
Below is a detailed list of models:
2.5 (EPE) 2469ccm 121KM / 89kW 1995 / 10-2001 / 09
2.5 SE (EPE) 2464ccm 118KM / 87kW 1996 / 10-1999 / 09
2.5 i 4x4 (EPE HX) 2469ccm 122KM / 90kW 1991 / 12-2001 / 09
4.0 i (MX) 3960ccm 184KM / 135kW 1999 / 02-2001 / 09
4.0 i (MX) 3964ccm 184KM / 135kW 1991 / 12-2001 / 09
4.0 i 4x4 (ERH) 3964ccm 178KM / 131kW 1995/01-2001/09
Ljuddämpare to be welded on in place of the original one. The diameter of the pipe, the dimensions of the Ljuddämpare box and its length are selected so that the assembly of the Ljuddämpare is as easy as possible.
Model: E002 / 60/450
The product is not homologated and cannot be approved for use on public roads in the EU.
Ljuddämpare dimensions:
Can length - 450 mm
Rördiameter - 60 mm
Ljuddämpare box width / height - 130x220 mm
If you plan to modify your Avgassystem to a greater extent, also increasing the diameter of the passage compared to the original, then we recommend ordering a model with an increased diameter of the passage
63.5 mm - model E002 / 63/450
70 mm - model E002 / 70/450
76 mm - model E002 / 76/450
However, if you want a more subdued sound, you can order the version with a silencing embossing, available at another auction, the EP002 / 60/450 model. Or similarly for the version with embossing, other flow diameters:
63.5 mm - model E002 / 63/450
70 mm - model EP002 / 70/450
76 mm - model EP002 / 76/450
One side of the Ljuddämpare with offset through tube outlet.
The through-tube diameter is always the same both inside and outside the Ljuddämpare. We do not use the tricks of upsetting and expanding the Ljuddämpare nozzles, where from one Ljuddämpare model several models with different pipe diameters are made, and in fact the diameter of the passage remains the same.
The other side of the Ljuddämpare with the center entry of the through tube.
The Ljuddämpare assembly side for the car as above - centrally inlet / outlet shifted.
In the case of universal use, the mounting side does not matter.
A Ljuddämpare with a pass-through construction, damped with Rostfritt stål wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
